Spillway Bowl and Basin Items Sold Separately
Product Accessories
This Aquascape Spillway Bowl and Basin can be installed as a standalone disappearing water feature, or several spillway bowls can be linked together for an amazing display. The Spillway Bowls can also be used with the Aquascape Large AquaBasin.
- Made from durable GFRC
- Unique and beautiful patina finish
- Light weight and easy to install
- OK in Chlorinated Water
- Silicon Plug in Bottom of Spillway Bowl to fit lighting wires through
Cast concrete is a hand-finished process. As such, GFRC finishes will vary by unit. There will be a color variance of up to 15% in each unit. There may also be uneven texture or pattern as well as small holes in the surface caused by air or water trapped on the surface during casting. This is a normal trait of cast concrete and is not covered under warranty.
Spillway Bowls: Spillway Bowls can be installed as a standalone disappearing water feature using an Aquascape AquaBasin® 45 or installed into an existing pond or water feature
78355 Spillway Bowl 19"
78204 Spillway Bowl - 32" Diameter / Overall height -14” and the inner height - 11.5” / Outside Diameter at bottom 12"
Spillway Basins:
78205 Spillway Basin - 40" Diameter / Overall height -16” and the inner height - 13”
78356 Spillway Basin 21"
Spiillway Stands: Made from durable GFRC, it has a unique patina finish that blend naturally with the Spillway Bowl or Basin. Center hole allows for simple plumbing during installation.
78206 Spillway Bowl Stand (2-Pack)
78357 Spillway Stand 6"
Note: Must be Truck-Shipped
Question:
Can it this be left outside in the winter in Wisconsin?
Aquascape Answer:
If it must be left outside, I would turn it upside down and put a tarp over it.
Question:
I don't have quite enough room for the large AquaBasin (45x45x10) with the Spillway Bowl and Stand. Will the Small AquaBasin (30x30x10) work?
Aquascape Answer:
As long as it is falling directly back into the basin & not elevated more than 2’ it will work.
Question:
I have the Spill-bowl Kit and want to add lights to the inside of each bowl for night time use. I was told to use the Up light, item # 84032. My question is will the wire run to the outside of the bowl via up the inside, over the lip of the bowl and out? Might ruin the beauty of the bowls. Maybe I'm missing something.
Aquascape Answer:
84032 can be used in the spillway bowl. There is a silicone plug on the bottom that you can thread the cord through.
View the PDF for complete operating instructions.
